Al Lug 800mm2 - Blank

Product Description

Aluminium Lug 800MM– (Blank)

For stranded sector and circular stranded Aluminium conductor.

CABAC Aluminium Lugs are manufactured by a forging process from solid 99.6% pure electrical grade Aluminium rod. This eliminates any imperfections in the metal structure which are often found in cast Aluminium lugs. The long-term electrical reliability is improved, eliminating future hot joints. Featuring a unique 'funnel' entry, stranded sector cable can be easily inserted into the barrel, and most importantly the lug palm can be orientated in any direction.

The barrel is chemically treated to reduce contact resistance, and is filled with jointing compound and capped. Before crimping, the conductors should be scratch brushed.

The lugs should be crimped with standard hexagonal dies, crimping from the palm outwards to force jointing compound into the conductors.

Standards and Compliance
AS/NZS4325 Part 1; IEC France; DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA.

Technical Information


Conductive Material Aluminium 99.6% pure Tensile Strength 110 MPa Ductile Rating 28% Final Metal State Fully Annealed Torque Recommendations Recommended torques for hardware should be to Australian and New Zealand Standards



Thread dia.(mm)Torque (Nm)

54

67

818

1036

1255

16150


Operating Temperature -20°C to 140°C Electrical Properties Resistivity 2.6 micro-ohm cm (max) Conductivity 61.8% IACS (min) Accepting Authorities Energy Australia, Integral Energy, Country Energy, Energex and many other recognised Authorities


Line drawings and recommended tooling details are available. See Brochures under Product Resources and select the latest Catalogue.

Any stud hole can be punched into lug palm on request.