Al Sector 4 Core 120mm2

Product Description

Aluminium Sector Lug (4 Core)

For solid sector 4 core only.

Aluminium sector lugs are available off the shelf in 120mm², 185mm² and 240mm². Other sizes are available on request and may become standard stock lines if demand arises. All lugs are standard with a 12mm stud hole and a larger stud hole can be drilled to order. The lugs are designed to fit solid sector aluminium cables dimensioned according to BS3988-1970 and are compatible with standard Australian tooling using common nest and indent dies.

CABAC Aluminium sector lugs are made from 99.6% pure electrical grade Aluminium. The surface has been chemically treated to reduce contact resistance and inhibit corrosion. The barrels are coated with a jointing compound, sealed with a cap, and the lugs are individually packed in plastic bags.

Three indent crimps are required and the sequence of crimping starts at the line marked 1. Please refer to our technical department for installation recommendations and advice.

Standards and Compliance

AS/NZS4325 Part 1; IEC France; DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA.

Technical Data

Nominal Conductor (mm2): 120
Stud Size: 12

Conductive Material
Aluminium 99.6% pure
Tensile Strength 110 MPa
Ductile Rating 28%
Final Metal State Fully Annealed

Electrical Properties
Resistivity 2.6 micro-ohm cm (max)
Conductivity 61.8% IACS (min)

Operating Temperature
-20 to +140 deg C