- Tin plated - designed to be bolted to copper or aluminium solid or stranded, sector or circular connectors
- Proven shear bolt technology for the perfect connection
- Grooved surface on inner wall breaks conductor oxide layers
- Conforms to Australian and many international standards
- Nominal dimensions for larger O.D.
Product Description
Bolted Aluminium Link
For Low Voltage applications up to 1000 volts
For solid and stranded, sector or circular conductor, aluminium or copper.
Bolted aluminium links are designed to be simply bolted to the conductor, which eliminates the need for crimping tools and the attendant operator skills. The conductor is connected using a proven shear bolt technology, by which the shear bolts are simply tightened until they shear. Both stranded and solid conductors can be connected in the same way, by simply tightening the shear bolts, which creates the correct torque on the bolts for a perfect connection.
The inner surface of the link barrels have a specially designed grooved surface, which is designed to break oxide layers on the conductor, creating a low resistance barrel to conductor interface which performs better than crimped joints. This low resistance interface applies to both stranded and solid conductors. The links are supplied tin plated, which means they can be used for copper and aluminium conductor. They are specially designed for LV applications and are specially chamfered to eliminate sharp corners.
The connector is manufactured from high strength aluminium alloy that is tin-plated to allow the mixing of conductor materials. The installation of the connector requires only an allen key. This product has been fully tested to AS4325 in CABAC's NATA laboratory, and test reports can be provided on request.
Bolted Aluminium Link Features
Simple installation which eliminates the need for crimping tools
Grooved inner surface of barrel performs better than a crimped joint
Specially chamfered to eliminate sharp corners
Tin plated link - use for copper and aluminium conductors
Standards and Compliance
AS/NZS4325 Part 1, IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom, UL/NEMA USA
Technical Data
Conductor Range (mm2): 240-300
Bolts Dia. (mm): 20
Conductor No. of Bolts: 6
Conductive Material
Aluminium 99.6% pure
Tensile Strength
120 Mpa
Set Screw Material
Brass alloy tin plated
Shear Head Bolts
Brass alloy tin plated
Operating Temperature
-20 to +140 deg C
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
Location | |
---|---|
Please contact us to know more about this item's availability or possible restock dates.