- Made from high conductivity annealed Copper
- Crimped with CABAC and MSS Power standard tooling and dies
- Complies with AS4325.1
- General purpose crimp lugs
Product Description
Copper Crimp Lug - Standard Range
CABAC copper crimp lugs are made from 99.9% + cu high conductivity annealed copper which gives the best electrical properties possible.
It is our recommendation that CABAC copper crimp lugs should be crimped with standard Australian tooling.
Conformant Standards
AS4325 Part 1 Australia; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and NEMA USA
Test reports are available on request
Technical Information
Conductive Material
Copper 99.95% pure
Oxygen content 30 p.p.m Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state fully annealed
Electroplating Material
Tin 99.9% pure
Other metals lead + antimony
Thickness 5 -10 microns
Dimensional Specification
Tooling is interchangeable between CABAC, Utilux and Burndy
General Electrical Properties
Total conductivity 99.7% IACS
Total resistivity: 1.738 micro-ohm cm
Accepting Authorities
Electricity Services Victoria, Energy Australia, Rail Services Australia, Energex, Western Power, Ergon, Integral Energy, Country Energy, Powercor and many other recognised authorities
Torque Recommendations
Recommended torques for hardware should be to Australian and New Zealand Standards
Thread dia.(mm) / Torque (Nm)
5 / 5
6 / 9
8 / 22
10 / 44
12 / 77
16 / 190
Specifications
Nominal Conductor (mm2): 120
Stranding No./Dia.: 37/2.03
ID Size (mm): 15.6
Stud (mm): 8
Qty Per Box: 25
Stud Size (mm): | 8 |
---|---|
Cable Size (mm2): | 120 |
Lugs and Links - Material: | Copper |
Lug Type: | Standard |
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
Location | |
---|---|
Please contact us to know more about this item's availability or possible restock dates.