Crimped with CABAC and MSS Power standard tooling and dies
Complies with AS4325.1
General purpose crimp lugs
Copper Crimp Lug - Standard Range
CABAC copper crimp lugs are made from 99.9% + cu high conductivity annealed copper which gives the best electrical properties possible.
It is our recommendation that CABAC copper crimp lugs should be crimped with standard Australian tooling.
AS4325 Part 1 Australia; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and NEMA USA
Test reports are available on request
Copper 99.95% pure
Oxygen content 30 p.p.m Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state fully annealed
Tin 99.9% pure
Other metals lead + antimony
Thickness 5 -10 microns
Tooling is interchangeable between CABAC, Utilux and Burndy
General Electrical Properties
Total conductivity 99.7% IACS
Total resistivity: 1.738 micro-ohm cm
Electricity Services Victoria, Energy Australia, Rail Services Australia, Energex, Western Power, Ergon, Integral Energy, Country Energy, Powercor and many other recognised authorities
Recommended torques for hardware should be to Australian and New Zealand Standards
Thread dia.(mm) / Torque (Nm)
5 / 5
6 / 9
8 / 22
10 / 44
12 / 77
16 / 190
|Stud Size (mm):||8|
|Cable Size (mm2):||150|
|Lugs and Links - Material:||Copper|
Please contact us to know more about this item's availability or possible restock dates.