Copper Reducing Link 50-35mm2
Item Number:
CASR50/35
Packaging Unit:
1 / each
- Suitable for circular and sector stranded copper conductors
- Application: reducing joints, fly leads, tails,etc
- Impermeable barrier for oils and water
- Crimped with CABAC and MSS Power standard tooling copper dies
- Crimp with standard Australian/NZ dies
Product Information
Product Description
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 50
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
| Cable Size Large End (mm2): | 50 |
|---|---|
| Cable Size Small End (mm2): | 35 |
| Lugs and Links - Material: | Copper |
Loading...
Write Your Own Review
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
| Location | |
|---|---|
Please contact us to know more about this item's availability or possible restock dates.
