Suits HPM, Clipsal and Traders wall plates with knobs
World's lowest standby power - 100mW
Patented ripple tone rejection
The HNS620DT dimmer switch is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS620DT provides deep-dimming to zero on most lamps. This versatile 2-in-1 unit also provides push-button ON/OFF control and is the perfect solution for dimmable LED lighting and dimmable compact fluorescent lamps.
The HNS620DT is equipped with timed dimming, a convenient bonus feature that automatically dims or brightens lighting. A double tap while lighting is ON will gradually dim lighting over 30 minutes before turning off. Conversely, a double tap when lighting is off will gradually increase brightness to full over 30 minutes. The LED indicator will blink every 5 seconds during timed dimming. The countdown can be cancelled at any time with a sustained 2-second press of the button.
Applications and Compatibility
The HNS620DT is designed for indoor use. It is not rated for outdoor installation. Suggested uses include LED & CFL lighting. NOT SUITABLE FOR FANS AND MOTORS.
For Multi-way dimming and ON/OFF, use the HNS020RB Remote Button.
Knobs included to suit CABAC, Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.
Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS620DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.
|Max Current (A):||1.5|
|Operating Voltage (V):||220-240|
|Min Load (W):||1|
|Max Load (W):||350|
|Button Type:||Push, Rotary|
Please contact us to know more about this item's availability or possible restock dates.