Off delay settings: CH 1 (lighting) 5 sec to 30 min, CH 2 (HVAC) 10 sec to 60min
30m detection zone, up to 10 slaves extend detection zone even further
Recessed or surface mount with junction box included
Optional IR remote control
The CPD-360P-SLAVE is a slave unit for use in connection with the CPD-360P PIR presence detector. The product is suitable for lighting or HVAC automation control and is designed to extend the detection coverage provided by the master device.
A slave detector works as a movement register to send a signal to the master detector. Under this mode, load will perform according to the settings of the master sensor. Up to 10 slave units can be attached to each CPD-360P. Refer to the product datasheet for a visual diagram of the detection coverage that this system provides.
The CPD-360P-SLAVE is suitable for halogen, fluorescent and LED lighting, and features impulse mode for switching a staircase timer. The device has a 360-degree detection angle with a detection lens shield to allow for the angle to be adjusted. Suitable for flush mounting or surface mounting with the included junction box.
Operating Specifications and Technical Data
Detection Angle: 360 degrees
Detection Range: Diameter 30M
Environmental Protection: IP40 (IP54 with junction box included)
Operating Temperature: -20 to +45 degrees Celsius
Rated Voltage: 220 - 240V ~ 50/60HZ
|Detection Range (m):||30|
|Number of Channels:||2|
|Mounting Type:||Surface, Ceiling|
|Lamp Compatibility:||Incandescent, Halogen, Fluoroscent, LED, Energy Saving|
Please contact us to know more about this item's availability or possible restock dates.