- 2-in-1 light switch that automatically turns off after a programmed time
- Time delay from 1-24 hours, in hour increments
- Settings retained even after loss of power
- Suits Clipsal Saturn and Saturn Zen style wall plates
The S-Click HNS426TM is a 2-in-1 programmable timer switch that automatically turns lights or small heaters off after a pre-set time has elapsed. Time delay can be set in hour increments from 1 to 24 hours - perfect for areas that need to be lit for extended periods and for heated appliances like towel rails. Supporting both timer and non-timer functions, this unit also allows for lights and appliances to be manually turned off with a quick tap.
Our hour timer switch is ideal for domestic use and can be retrofitted to most installed lights. An amber LED indicates device status and gives an expiry warning before time-out. The timer settings are retained even after loss of power and can be configured to power up on or off after loss of mains power.
Programming your chosen off time couldn't be simpler. A sustained 10 second press of the button enters programming mode. Just tap the button once for each hour of run time you require, up to 24 hours. Programming mode expires 10 seconds after the last tap, and the unit then commits your settings to memory. If you happen to press the button more than 24 times, the maximum run time of 24 hours will be stored.
The HNS426TM is also equipped with Boost Mode, a convenient bonus feature that allows users to double the program run time (up to the maximum 24 hours). Instead of a quick tap, a sustained two second press of the button will initiate boost mode and the timer program will be automatically doubled - for example, a 2-hour program would be extended to 4 hours.
Applications and Compatibility
An hour timer is perfect for areas where lighting is required for an extended period, such as security lighting, garden lighting or decorative lighting. The HNS426TM is also suitable for small heaters such as heated mirrors and towel rails (<400W).
NOTE: Not suitable for fans, motors or iron core ballasts.
S-Premium Timers are a range extension of the successful S-Click Smart Living range and are specifically designed to be compatible with Clipsal Saturn and Saturn Zen wall plates. These push button timers make use of the button already installed in the wall plate, allowing for your newly installed S-Click timer to perfectly match existing installed switches.
The HNS426TM is multi-way switching capable using 240V normally open momentary switches - refer to the product datasheet for more information.
Operating Voltage:230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 400VA
Minimum Load: 10VA
Maximum Current capacity: 1.7A
Terminals: Screw Terminals suit 0.5mm2 to 1.5mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS426TM is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product User Manual.
|Max Current (A):||1.7|
|Max Time Out (hrs):||24|
|Max Load (VA):||400|
|Min Load (VA):||10|
|Timer Range:||1 ~ 24 hours|
|Number of Wires:||2|
Your ordered quantity for this item is more than what we have in stock.
Please contact us to know more about this item's availability or possible restock dates.