Senses movement and light to trigger S-Click timer mech's
Fits in standard HPM and Clipsal face plates with lenses
Designed, engineered and manufactured in Australia
The HNS060MD is a passive infrared (PIR) motion detector for use in conjunction with S-Click 3-wire timers. The PIR sensor provides hands-free switching and prevents lights from timing out while an area is in use.
The HNS060MD is able to detect motion up to two metres away, and will continuously restart the timer as long as movement is detected in this range. When motion is no longer detected, the timer will then turn off the lights after a pre-programmed time has elapsed. This provides effective power savings without the need to manually reset a timer.
Applications and Compatibility
This motion detector is ideal for bathrooms, storerooms, laundries and other areas that receive no natural light. The HNS060MD prevents lighting from timing out when the area is occupied whilst also ensuring that lights will never be accidently left on when they aren't needed.
The HNS060MD must be used with one of the following S-Click 3-Wire timers:
HNS440TM - 3-Wire Minute Mech Timer
HNS450TM - 3-Wire Hour Mech Timer
Fits in standard HPM and Clipsal face plates - includes matching lenses.
Operating Voltage: 220 - 240Va.c. 50Hz
Operating Temperature: 0 to +50 degree Celsius
Certified Standards: CISPR15, AS/NZS 3100
Maximum Load: As per connected S-Click Timer Switches
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS060MD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For installation instructions, operating instructions and important safety warnings, refer to the product datasheet (see Additional Information).
|Max Current (A):||5|
|Operating Voltage (V):||220-240|
Please contact us to know more about this item's availability or possible restock dates.