Copper Lug 1200mm2 Cable Blank

Product Description

Copper Crimp Lug - Standard Range

CABAC copper crimp lugs are made from 99.9%+ cu high conductivity annealed copper which gives the best electrical properties possible.

CABAC copper crimp lugs are capable of withstanding a continuous operating temperature of 155– C, which is well above the temperature properties of most lugs.

It is our recommendation that CABAC copper crimp lugs should be crimped with standard Australian tooling.

Standards and Compliance
AS4325.1
Test reports are available on request

Technical Information


Conductive Material Copper 99.95% pure Oxygen content 30 p.p.m Max. Tensile strength 200 MPa Ductile rating 40% Final metal state fully annealedDimensional Specification Tooling is interchangeable between CABAC, Utilux and Burndy

Electroplating Material Tin 99.9% pure Other metals lead + antimony Thickness 5 -10 microns Conformant Standards AS4325 Part 1 Australia; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and NEMA USA

General Electrical Properties Total conductivity 99.7% IACS Total resistivity: 1.738 micro-ohm cm Operating Temperature -55°C to 155°C due to oxygen-free copper

Accepting Authorities Electricity Services Victoria Energy Australia Rail Services Australia Energex Western Power Ergon Integral Energy Country Energy Powercor and many other recognised authorities Torque Recommendations Recommended torques for hardware should be to Australian and New Zealand Standards



Thread dia.(mm)Torque (Nm)

55

69

822

1044

1277

16190