- Made from high conductivity annealed copper
- Crimped with CABAC and MSS Power standard tooling and dies
- Complies with AS4325.1
Product Description
Copper Long Barrel Lugs are designed for external use. There is no window present and the palms are solder sealed to stop the ingress of water. The extra long barrel allows more crimps than usual, in high stress areas, such as high voltage terminations, drop out
fuses etc. The extra long barrel also allows more length for heatshrink sealing, to ensure a totally air tight seal.
The Long Barrel Outdoor Style Lug is designed for crimping with standard hexagon dies (also used for the standard range of copper lugs).
Made from 99.9%+ cu high conductivity copper, this lug provides the best electrical properties possible.
If a longer palm with two or more stud holes is required, please see the Long Palm Long Barrel Lug (LPB Range).
Standards and Compliance
AS4325 Part 1 Australia; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and NEMA USA
Test reports are available on request
Technical Data
Nominal Conductor (mm2): 15
ID Size (mm): 5.5
Stud (mm): 6
Conductive Material
Copper 99.95% pure
Oxygen content 30 p.p.m Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state fully annealed
Electroplating Material
Tin 99.9% pure
Other metals lead + antimony
Thickness 5 -10 microns
General Electrical Properties
Total conductivity 99.7% IACS
Total resistivity: 1.738 micro-ohm cm
Operating Temperature
-55 to 155 deg C due to oxygen-free copper
Dimensional Specification
Tooling is interchangeable between CABAC, Utilux and Burndy
Stud Size (mm): | 6 |
---|---|
Cable Size (mm2): | 16 |
Lugs and Links - Material: | Copper |
Lug Type: | Outdoor (No Window and Long Barrel Sealed) |
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
Location | |
---|---|
Please contact us to know more about this item's availability or possible restock dates.