Copper Circ Breaker Lug 35mm 6mm Stud

Product Description

Copper Circuit Breaker Lugs

CABAC Circuit Breaker Lugs are specially made for terminating large cables to circuit breakers. Since flashover distances have reduced, the connecting tunnel in breakers has become narrower, and fitting lugs in 150 to 250A breakers has become a problem because the palms of conventional lugs are too wide. This range of lugs have the same barrel dimensions as the standard range, so normal crimping rules apply, using the correct die for the cable size.

Many switchboard builders use flexible cables and this lug features a unique bell mouth, which makes insertion of fine stranded conductors much easier.

Made from 99.9%+ cu high conductivity copper, this lug provides the best electrical properties possible.

If a lug is not listed for your application please contact CABAC sales, as we are continually adding to the range.

Standards and Compliance

AS/NZS4325 Part 1; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and UL/NEMA USA
Test reports are available on request

Technical Data

Nominal Conductor (mm2): 35
ID Size (mm): 8.2
Stud (mm): 6
Qty Per Box: 50

Conductive Material
Copper 99.95% pure
Oxygen content 30 p.p.m Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state fully annealed

Electroplating Material
Tin 99.9% pure
Other metals lead + antimony
Thickness 5 -10 microns

General Electrical Properties
Total conductivity 99.7% IACS
Total resistivity: 1.738 micro-ohm cm

Operating Temperature
-55 to 155 deg C due to oxygen-free copper

Dimensional Specification
Tooling is interchangeable between CABAC, Utilux and Burndy