Copper Barrier Link 10mm2
Item Number:
CASB10
Packaging Unit:
1 / each
- Designed for paper cables or in any situation where an impermeable barrier to oil or moisture is required
- Reducing links are barrier type as well
- Crimped with CABAC and MSS Power standard tooling copper dies
Product Information
Product Description
Copper Barrier Link
CABAC Copper Barrier Links are designed for use with paper insulated cables or any situation where an impermeable barrier to oil or moisture is required.
Note: Do not crimp close to the centre barrier or the link may shear.
Standards Compliance
AS/NZS4325 Part 1; IEC France; DIN/VDE Germany; JIS Japan ;BS United Kingdom; UL/NEMA USA.
Test reports are available on request.
Technical Data
Nominal Conductor (mm2): 10
I.D. Size (mm): 4.5
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 100 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
| Cable Size (mm2): | 10 |
|---|---|
| Lugs and Links - Material: | Copper |
Loading...
Write Your Own Review
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
| Location | |
|---|---|
Please contact us to know more about this item's availability or possible restock dates.
