- Designed for paper cables or in any situation where an impermeable barrier to oil or moisture is required
- Reducing links are barrier type as well
- Crimped with CABAC and MSS Power standard tooling copper dies
Copper Barrier Link
CABAC Copper Barrier Links are designed for use with paper insulated cables or any situation where an impermeable barrier to oil or moisture is required.
Note: Do not crimp close to the centre barrier or the link may shear.
AS/NZS4325 Part 1; IEC France; DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA.
Test reports are available on request.
Nominal Conductor (mm2): 25
I.D. Size (mm): 7.5
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
-55 to 100 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
|Cable Size (mm2):||25|
|Lugs and Links - Material:||Copper|
Your ordered quantity for this item is more than what we have in stock.
Please contact us to know more about this item's availability or possible restock dates.