Copper Stalk 70mm2 12mmStalk
Item Number:
CS70/12
Packaging Unit:
1 / each
- Stalk lugs are generally used to attach cable terminations to a copper overhead conductor
- Suitable for electrical equipment clamp terminals
- Crimped with CABAC and MSS Power standard tooling copper dies
- The first digits after CS indicate conductor size
- The last digits after / indicates diameter of the stalk
Product Information
Product Description
Copper Stalk
The CABAC copper stalk range are crimped with standard hexagon dies for the equivalent copper lug. The tooling is dimensionally compatible with standard Australian tooling.
Virtually any stalk variant can be manufactured to order.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 70
Stalk (mm): 12
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
| Cable Size (mm2): | 70 |
|---|---|
| Stalk Size (mm): | 12 |
| Lugs and Links - Material: | Copper |
Loading...
Write Your Own Review
Your ordered quantity for this item is more than what we have in stock.
Stock Availability
| Location | |
|---|---|
Please contact us to know more about this item's availability or possible restock dates.
