Dual Switching Dimmer Kit - 610Dt

Product Description

The S-Click Dual-Switching Dimmer Kit is a convenient bundle containing a 2-wire push button digital dimmer and remote button, allowing for multi-way dimming and ON/OFF over standard wiring. Our rugged design features improved over current, over voltage and over temperature protection plus patented ripple tone rejection.

S-Click push-button style dimmers feature ON/OFF control with a quick tap; lighting turns on at the last set brightness. Holding the button dims lighting up or down until the preferred brightness is achieved. A double tap while lighting is on will activate timed dimming, a convenient feature that gradually dims lighting over 30 minutes before turning off. Conversely, a double tap when lighting is off will gradually increase brightness to full over 30 mins.

This unit is compatible with both HPM and Clipsal style wall plates.

Kit Contents

1x HNS610DT - Push Button Digital Dimmer
1x HNS020RB - Remote Button

Specifications

HNS610DT Operating Conditions
Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

NOT SUITABLE FOR FANS AND MOTORS

The HNS610DSDK is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and other information, refer to the User Manual.